500 lph ro water treatment plant price
Molecular is a professional manufacture of water treatment equipment since 2003.
At present we have two workshop and 45000m2 new factory in building.
Above 20 engineers and more than 100staffs.
Strict quality control certificated by ISO9001:2008
The Reverse Osmosis Process uses a semipermeable membrane to separate and remove dissolved solids, organics,
submicron, colloidal matter,viruses, and bacteria from water. The process is called ‘’reverse’’ osmosis since it
requirespressure to force pure water across a membrane,leaving the impurities behind. Reverse Osmosis is capable
of removing 95-99% of the total dissolved solid (TDS) and 99% of all bacteria,Thus providing safe, Pure Water.
Feed Water for this plant:
Tap water, Well water, Ground water,Brackish water
Outlet water quality:
- Desalination rate >99%, removing of all bacteria,most iron
- Conductivity<15us.cm@25C
- support design according to customers' requirment
- 500liter per hour( support other capacity from 250liters to 100000liters per hour)
water treatment plant main components:
Component name |
Material/brand
| Function |
Multi-media filter
|
FRP tank,automatic/Manual choosable
| used to filter sand and sediment (turbidity) down to approximately 20 Microns |
Activated Carbon filter |
FRP tank,automatic/manual choosable
| remove chlorine from feed water, which protects TFC membrane from damaging chemical reaction with chlorine(will not need if the raw water is well water) |
Anti-scale dosing unit |
automatic dosing, water softener choosable to replace dosing unit
|
dosing anti-scale chemical provent Ca,Mg iron from scaling tp protect membrane
|
Precision filter |
stainless steel
| futher filting of the water before inlet to ro membrane,protect high pressure pump and ro membrane |
High pressure pum |
CNP brand
| provide the necessary pressure for ro membrane |
RO membrane |
DOW USA, FRP vessel housing
| desaliation rate of dow 8040 ro membrane is above 99%,removing over 99% irons |
CIP system |
auto clean system for RO membrane
| usually provide a clean tank and a clean pump |
Ro Plant features
1. Design recovery rate for whole plant can up to 80%
2. Have two type auto control choosable: PLC with touch screen or Electric cabinet with bottom
3. Auto flush for ro membrane,filter
4. Low&high pressure protection
5. Water level on-line monitoring
6.Water conductivity on-line display
7.Water pressure on-line display
8. Equipment with pressure gauge, flow meter ,etc to real-time monitoring
9.Over pressure alarm
10. Water tank full stop water,auto work when water tank level is low
contact
For any size puff or bottle
01975739994 - 01685739994
e-mail- alifwatertreatmentbd@gmail.com