সোমবার, ৬ নভেম্বর, ২০১৭

RO Water Treatment Plant



500 lph ro water treatment plant price

Molecular is a professional manufacture of water treatment equipment since 2003.
At present we have two workshop and 45000m2 new factory in building.
Above 20 engineers and more than 100staffs.
Strict quality control certificated by ISO9001:2008


The Reverse Osmosis Process uses a semipermeable membrane to separate and remove dissolved solids, organics,
submicron, colloidal matter,viruses, and bacteria from water. The process is called ‘’reverse’’ osmosis since it
requirespressure to force pure water across a membrane,leaving the impurities behind. Reverse Osmosis is capable
of removing 95-99% of the total dissolved solid (TDS) and 99% of all bacteria,Thus providing safe, Pure Water.

Feed Water for this plant:
Tap water, Well water, Ground water,Brackish water

Outlet water quality:
  • Desalination rate >99%, removing of all bacteria,most iron
  • Conductivity<15us.cm@25C
  • support design according to customers' requirment
  • 500liter per hour( support other capacity from 250liters to 100000liters per hour)

water treatment plant main components:

Component name

Material/brand
Function

Multi-media filter

FRP tank,automatic/Manual choosable
used to filter sand and sediment (turbidity) down to approximately 20 Microns
Activated Carbon filter

FRP tank,automatic/manual choosable

remove chlorine from feed water, which protects TFC membrane from damaging chemical reaction with chlorine(will not need if the raw water is well water)
Anti-scale dosing unit

automatic dosing, water softener choosable to replace dosing unit
dosing anti-scale chemical provent Ca,Mg iron from scaling tp protect membrane
Precision filter

stainless steel

futher filting of the water before inlet to ro membrane,protect high pressure pump and ro membrane
High pressure pum

CNP brand
provide the necessary pressure for ro membrane
RO membrane

DOW USA, FRP vessel housing
desaliation rate of dow 8040 ro membrane is above 99%,removing over 99% irons
CIP system

auto clean system for RO membrane
usually provide a clean tank and a clean pump
Ro Plant features

1. Design recovery rate for whole plant can up to 80%


2. Have two type auto control choosable: PLC with touch screen or Electric cabinet with bottom


3. Auto flush for ro membrane,filter


4. Low&high pressure protection


5. Water level on-line monitoring


6.Water conductivity on-line display


7.Water pressure on-line display


8. Equipment with pressure gauge, flow meter ,etc to real-time monitoring


9.Over pressure alarm



10. Water tank full stop water,auto work when water tank level is low

contact
For any size puff or bottle
01975739994 - 01685739994
e-mail- alifwatertreatmentbd@gmail.com 



কোন মন্তব্য নেই:

একটি মন্তব্য পোস্ট করুন